Pipe insulating company in need of installers in new building sites.

JOB RESPONSIBILITIES

• Install insulation around piping
• Make necessary adjustments for pipe fitting
• Measure, cut, fabricate insulation, and metal jackets using sharp knives, saws, tin snips, etc.
• Climb stairs, ladders and scaffolding
• Work off elevated lifts and/or extension ladders taller than 12' occasionally
• Work in a construction environment
• Work indoor and outdoor temperatures
• Work in confined spaces on occasion or as needed (tunnels, attics, building chases)

SKILLS & QUALIFICATIONS

• Experience with pipe insulation/craftsman trade
• Must be able to provide own basic tools (tape measure, sharp knife, razor knife-with retractable blade, channel lock type pliers, scissors, and tin snips
• Dependable and reliable
• Read and use tape measure along with basic math skills
• Listen and understand directions, then apply
• Be able to carry anywhere from 50-100lbs

SAFETY REQUIREMENTS

• Wear hard hat, safety glasses/goggles, and gloves (provided by employer)
• Wear safety toed boots, long pants and minimum short sleeve shirt (provided by employee)

EDUCATION/EXPERIENCE REQUIRED

• Experience preferred but will train

WORK HOURS/SHIFT

• 1st shift M-TH (5:30 am – 4:30 pm) with possible over-time on Friday.  Transportation is provided to and from the Muscatine pick up location to the work sites.

WAGE

• $20/hr

BACKGROUND SCREENING/REQUIREMENT

• Pre-employment background screening
• Pre-employment drug screen

If interested contact Christine at 563.263.6589 or apply with the button below

OVERVIEW

An abrasives company located in Wilton, IA is looking for a Production Technician that is willing to learn and grow with the company.  Candidate must be willing to learn a variety of different production tasks and machines.

SKILLS/QUALIFICATIONS
• Dependable and Reliable

• Read a ruler

• Use a calculator

• Must not be allergic to latex

• Compliance and attention to all safety regulations

WORK HOURS/SHIFT
• Monday-Thursday 5:30am-4pm
 

WAGE

 $18.00 per hour    

BACKGROUND SCREENING/REQUIREMENTS
• Pre-employment background check.

Check with Gina at (563)263-6589 or gothmer@tempassociates.com

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Follow written and verbal instruction.
• Maintain a clean and organized workspace.
• Feed raw material or parts to machines and assure that they are properly clamped in place.
• Monitor equipment to assure proper function throughout the process.
• Monitor the process to assure that the finished products meet the quality and quantity constraints of the company.
• Control and adjust machine settings.
• Read blueprints for pertinent information.
• Inspect parts with precision measuring tools.
• De-burr, clean and package parts to required standards.
• Trouble shoot machine and/or process issues.
• Report to Supervisor(s) or Team Leads keeping them updated on production activities and progress.
• Communicate and/or document all pertinent information.
• Work alongside other employees with the common goal to improve performance and reliability of the process.

QUALIFICATIONS AND ESSENTIAL SKILLS

• Math Skills
• Attention to Detail
• Mechanical and Technical Skills
• Stamina
• Minimum of a high school diploma or equivalent preferred; technical degree is a plus.
• Qualified applicants will receive on-the-job training.

BACKGROUND INFORMATION

• Must be able to pass a drug test.

HOURS AND PAY

• Position will train on 1st shift (M-Th 6:00 am - 4:30 pm) then schedule moves to night shift*
• 2nd shift: M-Th: 4:30 pm - 3 am
• $19.30 ($18 base pay + $1.30 shift premium)
• mandatory overtime on Friday when required

LOCATION

• Tipton, IA

If interested contact Christine at cfear@tempassociates.com or call 563.263.6589. To apply click the apply now button below.

Individual will be performing various tasks within a variety of production area(s) as needed. This will require the ability to operate various equipment and tools with training available on the job.

SPECIFIC JOB DUTIES

Job duties will include but not limited to:

• Operating a variety of machines such as: punch press, hydraulic press, brake press drill press, rollform, powder coat paint line and welding
• Moving and maneuvering carts and coils of  steel
• Performing quality checks on steel for proper length using various gages and calibers
• Performing visual inspection of completed parts for quality and production defects
• Must be able to complete accurate daily production  paperwork
• Other duties as assigned

SKILLS/ ABILITIES

• Job requires a motivated, self-starter with initiative and a positive attitude. Individual must be dependable and have mechanical abilities to produce quality parts in a fast paced manufacturing operation. Job requires an individual who is conscientious about safety and quality.

SHIFTS

• 1st shift – 3:30 am – 2:00 pm (Mon-Thurs) **rotating Friday and Saturday hours
• 2nd shift – 2:00 pm – 12:30 am (Mon-Thurs) **rotating Friday and Saturday hours

WAGE

• 1st shift: $16/hr
• 2nd shift $17/hr 

If interested contact Christine at cfear@tempassociates.com or call 563.263.6589. To apply click the apply now button below.

Muscatine Lighting company is in need of production mig welders to work in their fabrication areas.

JOB RESPONSIBILITIES

• Weld parts for outdoor lighting systems.
• Grind and finish welds.
• Material Handling - lifting up 50 lbs.

SKILLS/QUALIFICATIONS

• 2 years of mig welding experience or school training.

WORK HOURS/SHIFT

• Monday through Thursday 5AM to 3:00PM.
• Overtime is common and happens on Fridays when needed.

WAGE

• $20 per hour

BACKGROUND SCREENING/REQUIREMENTS

• Pre-employment drug testing and background check required.

See Mike Thomas (563)263-6589, mthomas@tempassociates.com

Muscatine Lighting company is in need of a 2nd shift inside warehouse receiving person.

JOB RESPONSIBILITIES

• Operate forklift.
• Lift up to 50 lbs. regularly- will be required to do material handling packout.
• Attention to detail is important.

SKILLS/QUALIFICATIONS

• Dependable and reliable.
• Experience with a forklift is required. 

WORK HOURS/SHIFT

• 3PM to 1AM
• Overtime will be required.  50 hour work weeks are common. 

WAGE

• $19.25 per hour.  

BACKGROUND SCREENING/REQUIREMENTS

• Pre-employment drug testing and back ground check.

See Mike Thomas (563)263-6589.  mthomas@tempassociates.com

• Moscow Iowa manufacturer of hydraulic leveling systems for motor homes is in need of CNC operators

JOB RESPONSIBILITIES

• Working with machines in order to produce parts
• Material Handling – lifting up to 50 lbs.
• Use of tools

SKILLS/QUALIFICATIONS

• Dependable and reliable
• Experience using cnc lathes/mills
• Ability to use micrometers and calipers

WORK HOURS/SHIFT

• Monday – Friday 5AM – 3:30PM
• 50 hour work week with overtime pay after 40 hours

WAGE

• $17+ depends on experience

BACKGROUND SCREENING/REQUIREMENTS

• Pre-employment drug testing

If interested contact Mike at 563-263-6589 or click the apply now button below.

• Wilton, Iowa manufacturer of cold finished steel bars is in need of MIG welders.

DESCRIPTION

• Responsible for fitting and welding of steel, aluminum and stainless steel parts using a MIG and/or TIG process. Also required to perform other miscellaneous tasks, as assigned by his or her supervisor.

RESPONSIBILITIES

• Set up welding machines based on the job at hand or using a Welding Procedure Specification
• Read and interpret blueprints and/or drawings to determine the specific welding requirements - MIG and TIG weld steel, aluminum and stainless steel components based on the specifications of the blueprints and/or drawings
• Ensure work is done safely and meets quality standards
• Follow, create and help maintain Welding Procedure Specifications
• Assemble items as instructed by floor supervisor
• Keep work areas clean and organized and take proper care of all equipment and facilities
• Follow all company rules and policies
• Provide a great level of attention to detail and focus on the given task
• Follow all safety rules and quality standards
• Work with team members to maximize productivity and efficiency
• Prepare product for shipment
• Lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds), or using a hoist
• Uphold all ISO and OSHA standards applicable to the responsibilities above

SKILL REQUIREMENTS

• Experience with steel, aluminum and/or stainless steel required
• Experience with MIG and TIG welding highly preferred
• Experience with CNC press breaks, CNC folding machines and automatic saws highly preferred
• Ability to lift heavy items up to 60 pounds consistently required
• Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods
• Ability to identify and measure material
• Ability to produce quality products consistently
• Ability to follow instructions given both verbally and in written form
• Willingness to learn and work to the best of his/her abilities as well as dependable work ethic
• Knowledge of machines and tools, including their designs and uses
• Ability to read blueprints, drawings, calipers, tape measures and angle gauges

WAGE

• $19.75 an hour - paid weekly

HOURS

• 1st shift: M-F  6am-2:30pm (some overtime may be required)

BACKGROUND SCREENING/REQUIREMENTS

• Pre-employment background screening
• Pre-employment drug screening

If interested contact Mike at 563-263-6589 or click the apply now button.

The Behavioral Support Professional is responsible for assisting in daily living tasks, personal care, and support, and ensuring the personal safety and welfare of individuals with intellectual disability, mental illness, and/or challenging behavior in a residential setting.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Demonstrate knowledge, understanding, and implementation of the person’s individual program plan (IPP), individual service plan (ISP), and behavior intervention plan (BIP).
• Abide by HCBS guidelines and indicated in the HCBS manual.
• Uses good decision-making skills and accesses appropriate resources to develop quality services.
• Support the needs and goals of each client by taking them to medical appointments, to visit family and friends, to preferred leisure/recreational activities, and encouraging them to socialize with their peers.
• Maintain open communication with Supported Community Living Manager to inform team members on client progress with goals, medical and/or social needs.
• Collaborate and communicate with family members, caretakers, neighbors, case workers, and other involved individuals.
• Maintain records of medical and dental visits, current medications, illnesses, injuries, and special needs.
• Order prescriptions and non-prescription medications for clients, if needed.
• Check in medications from pharmacy and administer medication, First Aid, and/or CPR if necessary.
• Transport clients to and from medical appointments and outings around the community as needed.
• Maintain client funds by ensuring receipts are recorded, and filed, in a timely fashion.

REQUIREMENTS

• Requires a valid driver’s license and current auto insurance.
• Must successfully pass all pre-employment background checks.
• Ability to meet physical and mental requirements necessary to perform all functions of position.
• Ability to maintain confidentiality.
• Communication and relational skills to interact in a professional manner with staff and clients.
• Strong problem-solving skills and time-management skills.
• Basic computer skills.
• High School Diploma or GED is required.
• Preferred work experience with challenging and/or aggressive behaviors of individuals with intellectual disability.

EXPERIENCE

• Preferred work experience with challenging and/or aggressive behaviors of individuals with intellectual disability.

JOB TYPE

• Muscatine, IA
• $16-$19.60/hr. DOE
• Primarily 2nd, 3rd and weekends

If interested contact Karina at kvillegas@tempassociates.com or call 563.263.6589. To apply click the apply now button below.